Installing lighting fixture is considered as a DIY job which can be done all yourself. This will not only give you the satisfaction of doing the job all by yourself but also cutting the cost of overall project and it is such a nice thing for sure. When doing the steps of the lighting fixture installation, the wiring part is like the most important part of the project. It is because if you do it wrongly, the result might be bad. Connecting the wires of the lighting fixtures is important that is why you will need clear guide for doing that.
Standard lighting fixture usually has three wires which are black (as the current), white (as neutral), and copper (as the ground). You will find a plate that connects to the holes of the two screws on each box’s side, and to get it done first will be important before getting the wires connected. You may connect the wires to the lighting fixture in various ways. But here you can get the wires wrapped around the screws to get the connection made. You may also need to connect the wires to the both ceiling wires and wire nuts.
Get the three wires connected together. It is easy to get them connected together since all you need to do is to get them twisted together and then get the wire nut over them. Once the wires have been connected, you can move to the next steps of the lighting fixture installation. Make sure you make the line of the wires look neat and well organized for aesthetic reason. Appearance is everything for sure since it will be the determiner of your living place’s appearance whether it will be good or bad, awesome or just do so. If everything is done neatly and well organized, then the look will be interesting and awesome.
Popular Post This Week