Do you know, what is one of the busiest rooms inside your house? Yes right, it is the kitchen. Kitchen is where the foods of the family made and served, and it is often used as place for hanging around as well. Considering the importance of kitchen, making it as cozy & beautiful as possible will help your family to make their day anytime. Since before they start their activity they will have breakfast, in order to build the mood, a kitchen should look as gorgeous as possible. Here below are the things related to the issue of painted kitchen cabinets before and after. Check it out.
1. Get any drawers/ doors of your cabinets removed. Fir this job you can use the screwdriver for removing non wooden things (or we can say metal things) such as handles/ hinges.
2. After that, a drop cloth must be placed under the work area in order to protecting the floor from any chemical drop.
3. Next, get a thin painter stripper coat applied using the clean brush to the cabinets. Leave it for about 20 minutes until it will be ready.
4. After that, the original stain must be removed using a putty knife. Then get the cabinet’s surface scrapped until you remove the old stain. Using the metal scrapper will only make the wood damaged.
5. Next, the cabinet’s surface must be wiped using soft wet cloth in order to get any excess chemical removed. Wait until dry.
6. To get of good painted kitchen cabinets before and after, the entire cabinet’s surface must be sanded using 400 grit sandpaper. Make sure you do it until the surface get smoothened and then get the original stain cleaned.
7. After that, get a wood conditioner coat applied to the entire surface using a brush which is clean (make sure about this). This is aimed to get the new stain perfectly absorbed into the wood. Leave it until it’s dry.
8. Finally, get a thin even stain coat applied to the entire cabinets’ surface using a brush which is clean. Wait until it’s dry before getting it coated any further. Continue the step until you get your desired finish.
The old kitchen cabinets are just boring and seem to make the kitchen’s look as boring as its look. But what if we can make them look more “alive” with Refinish Kitchen Cabinets? Of course your old cabinets will look vintage rather than boring. I have gathered information related to this issue which hopefully can give you some help and the likes. Here below are the things related to the current issue discussed here. Check it out!
The question becomes: What is the first thing needed to know by us before doing any re-finishing to our kitchen cabinets?
Well, there are many ways to starting refinish kitchen cabinets, but the most important one is to get the purpose identified firstly. I mean, which one you want to do to your kitchen’s cabinets, staining it or simply painting it? Once you have decided the purpose of your re-finishing project you will be able moving to the next steps indeed. The next thing will be considering how much the work takes you. If the project is done by yourself, staining seems to be the best way since it is much easier to do & also better than get your cabinets painted. And for the painting activity, if it is related to your cabinets, just don’t do it by yourself, that’s all.
So, which one is better, painting or staining?
For this question I will answer depending from the information that I got, neither one is better or in contrary, worse. It will depend on the purpose and the style that you try to achieve (just like I’ve written firstly above). Painting the cabinets will give it more options of colors of course and the surface will be flat because the paint will get the wood grains covered. While staining will make the cabinets look lighter/ darker and get the existing wood exposed.
Hello my dear readers, we all meet again to talk much more about the home improvement and one topic I might to bring up for you right now is how to cut stair stringers. It is for real right now? Is it important for you to know such a matter? Okay, a lot of people are having trouble to cut the stair stringers and they do not know what to do about it. Hiring a professional worker to help you with that kind of thing might be a great option to take, but as you want to build your own stair, it’s possible for you to do it, especially as there are much information about how to cut stair stringers you could possibly find on the internet. So, what are you going to do then?
First of all, it’s important for you to have an exercise before you go to an actual cutting thing with the actual stair. This kind of practice can be done by doing the imagination of making a stair. The size might differ from one to another, but we could make it the same, which is a 74.79 inches high and 104.04 inch long. As you all have the right size you really want to build in stair stringer, it’s possible for you to do the clamping. You could put straight stick together with Steel Square by using C clamps. By the time you done with the tracing of square, you might slide it to the edge when it comes to the next step.
It is important for you to know that there are three common ways people use to attach the stair stringer, but not all of them are easy to do and that is why attaching riser boards is known as the most popular.
Gatlinburg Luxury Cabins with indoor pool are good for you who want to have memorable honeymoon or vacation. You also have to check your budget. Be sure to do not take unfrugal ways. Check more information about this in indoor pools company’s sites.
Are you thinking about buying stair treadmill ergometer because a lot of people are talking about such a matter, but you do not know exactly what that is and what purposes it offers for you? Don’t you worry my friend, because on this very occasion, I might talk a little bit more about the stair treadmill ergometer. Yeah, it is true as you mention that a lot of people are wondering what that is since this treadmill turns into such a popular topic right now. Okay, let’s talk more about it and I hope in the end, you will know exactly what this is all about.
You should stop right there as you think that stair treadmill ergometer is some kinds of high-tech piece of health equipment. Okay, the name might be a little bit tricky for you to imagine, but basically, it actually is known as a regular stair-climber, or stepmill. What about the ergometer? Okay, that name comes from the definition of an exercise machine that has the abilities to help you measure your work output. As you could see from its name—a stair-treadmill—it is a mixture between standard stepper you use to do and a treadmill or we could call it as a stepmill.
It’s not a new concept of training for most people who want to burn more calories from the body as a lot of people doing it before because they know that this kind of training is amazing when it comes to the result of getting rid of the fat. A regular stepper you use to know basically contains of two hydraulic pedals and you could do the push up and down. The way it works is almost the same with the way you climb the stair. Are you ready to do it?
When you face this challenge how to remodel a small bathroom on a budget, you should know the end result before you start your small bathroom remodeling plan. If you can’t enlarge your room then you need to determine which areas or features that you want to improve. You have several basic elements of a small bathroom. They include sink, toilet, shower, floor, walls and mirrors.
For installing under cabinet lighting, you need to firstly clear the counter top under the area you will be working. Remove anything from inside the cabinets that will have lights fitted into them. Choose the area where you want to install the lights. Consider the safety regulations of your lighting kit because many manufacturers will stay to keep lights 12 inches apart from each other. Make a mark on the cabinet in where to cut into using a pencil. After that, cut out a hole on each mark you made for the fixture positions. Create the holes using a hole saw fitted with a blade the size of the lighting fixtures. Take off the lens cover on each fixture and work from underneath the cabinet to install the lights. Position the lights with the lens facing downward toward the countertop. Drill into each hole to mount the fixture to the cabinet with three or four screws around the edge. Secure the fixture using a power drill to attach the wood screws. Place the power supply for the fixtures underside a cabinet or inside a cabinet so that the fixtures can be easily connected to the supply. Connect the wires of each light to the power supply wire with the right method depending on your make of lights. You need to drill a small home through cabinet walls to allow all wires pass through reaching the power supply.
Paint colors in your house are the one of important thing that you have to consider, especially in selecting paint colors. Selecting paint colors for your house must be considered correctly. If the paint colors are not suitable, it will produce the impression that your house was not clean and seem dark. So that will reduce the beauty of design that applied. You need paint colors that have good suitability. How about coastal paint colors? Do you think to get best coastal paint colors? In this article, we will provide you with the information about it.
Are you looking for the best brand of stair on the market? Do you want to have the right stair that could provide anything you need? As you want to find the right answers for those problems, you need to consider about the Lapeyre stair. What do you know about such a matter? Have you ever heard of that name before? Okay, let’s find out more about them. Lapeyre stair is a name of big player on the stair industry. The company receives positive responses from their customers that could see on the survey which conducted by Tulane University Freeman School of Business. Based on that survey, there is a fact which revealed that an extraordinary 98.5% of customers reported a 7, 8, 9, or 10 level of satisfaction with our products.
The company of Lapeyre Stair grows much bigger and not to mention that the company has all requirements needed as the best stair provider on the market as they received unanimous high marks for safety, space savings, ease of use and custom-height design based on the survey. You do not have to worry about all factors to consider when it comes to buy stair since the company could provide you with anything you need. What you really need to do is pretty simple, tell them what your wish about the stair, including the shape, style, or even the most important factor, its design.
It’s going to be a simple matter to obtain the best stair from this company. You do not have to waste a lot of times just to do the research all good points of the Lapeyre stair. The products from this company have good points, such as Full tread depth; Comfortable, face forward descents at steep angles; Center of gravity located over user’s feet.
Draw a layout of your garage floor plan and the available space to measure the usable space where you want to create storage. Make notes all areas that receive the least amount of traffic like the corners for a good space for adding storage. Consider the space needed to maneuver around a vehicle in a garage to choose areas for storage. Garage storage plans will be more useful if you plan to lift everything off the ground. You can extend the life of your tools, equipment and supplies by elevating them so that they won’t get wet from heavy rain or infested with insects. Sort the items you want to store in your garage by type and decide the best storage solutions for them. It can be heavy-duty shelves for heavy cans of paint, narrow shelves for small containers of nuts, bolts and screws, hanging tool organizers for hammers, screwdrivers and wrenches. Different types of tools will need a different storage solution. You can also sort your items in storage bins and label them to help you easily find the things that are stored inside. When everything is organized and sorted, it is easy for you to determine the right storage solutions.
Popular Post This Week