With vinyl tile you can create so many patterns on your floor that also improve your room design. Vinyl tiles have so many colors and styles that will fulfill your needs. Installing vinyl tile to your floor is that now I will tell you how.
Calculate your area of your room. You must measure the floor that will you install with the vinyl tile and then write it on the paper. After you know the wide of your room, you will figure how many vinyl tiles that you needs. There are two different types of vinyl tiles, there are vinyl tile that you no need to glue it and pre-glued. The pre-glued vinyl tiles are the easiest thing to do and take faster time to install, but it will last about years. You need to select vinyl tiles properly. And now you must prepare the old floor. Remove the shoe molding with hammer. Also don’t forget to remove the pieces that left behind. You can make it smooth with 100-grit sandpaper. All you need is to ‘’prepare” your old floor ready in order to install vinyl tile. Now you need to lay out your room that where you will plan to install the vinyl tiles. You can use chalk to marks the floor.
Now it is time to install your pre-glued tiles. Pre-glued vinyl no need extra adhesive. And then set the vinyl tiles on the floor, you must press it so firmly with floor roller. If you use unglued vinyl tiles, you need to paint the back of the vinyl tiles with vinyl adhesive but just thin layer. And push it on the floor and don’t forget use your floor roller to rub it. After that cover the entire of the floor with vinyl tiles, if you have some small area left that your whole tiles doesn’t fit, you must cut your tiles to make it fit with that part.
Popular Post This Week