Since drywall cannot hold nails or screws well, a great solution for this problem is offered by drywall anchors. While drywall doesn’t provide much power for holding nails, drywall anchors can exactly hold the wherever you want to drive the screw. How to install drywall anchors should be done with proper ways to make it useful effectively. Choose and mark the location of the drywall anchor using a stud finder before installing it.
If there is a stud in the wall, you won’t be able to install a drywall anchor. After marking, press a stud finder about 12 inches against the wall, depress the detect button and slide it towards the mark to allow it inform you if there is a stud. How to install drywall anchors can be continued by making a small hole using the nail and place the tip of a threaded drywall anchor. Screw it into the wall till the head flushed with the drywall’s surface. Drill a pilot hole smaller slightly than the plug type of your drywall anchor and press it to the pilot hole. Dry a molly that is big enough for a tight fit. Insert the anchor in it and tighten the bolt. Remove the bolt once it is tight and use it for fastening other accessories like picture hangers to the drywall anchor.
Some types of expansion anchors don’t need pilot holes since they are shaped like nails. Now you can drill a pilot hole to allow the wings of the toggle bolt pushing through when they are held against the bolt. Toggle bolts are important pieces since they can hang moderately heavy items from ceilings at best. So, although how to install drywall anchors is not easy, this can be helpful for you since it can help you place nails in your walls without having to worry about them being loosen.
Popular Post This Week