The work on how to install bead board ceiling required special construction for hanging known as the bead board ceiling frame. Bead board ceiling frame materials commonly used are wood, although nowadays known also order bead board ceiling made from hollow steel (iron-shaped box). This material is resistant to termites and fire that makes bead board ceiling last a long time compared to using wood. Stem size bead board ceiling frame is determined from the distance span of the room, the type of materials used, and the length of the hanging rod.The sizes of logs are based on empirical experience and are commonly used. The size can be changed according to the results of a calculation based on the strength of the wood. Ceiling order for ordinary horses made of wood, equipped with screw was placed alternately. On the easel board for ceiling order simply by using wooden battens.
In principle of how to install bead board ceiling hanger rods are the same, but the distance is not the same depending on the material that use bead board ceiling. In residential buildings in the installation of bead board ceiling, provision for high space / room for at least a minimum of 2.40 m unless sloping rafters at least ½ of the total space has a height of 2.40 m and a height of space remaining space at the lowest point not less than 1.75 m. In the laundry room and the bathroom is allowed until at least 2.10 m. After all ceiling installation process order finished, and then we put the bead board to the frame using screws or nails in the size that we have set previously.
The main purpose of how to install bead board ceiling is bead board ceiling to soundproof insulation and not easily dissipate heat. So that the room can be protected from the influence of the outside air temperature and annoying sounds cannot be entered directly into theroom. Installation bead board ceiling with insulation material which requires more and better accuracy. To add sound insulation, gypsumplate or piece of hardwood can be installed on board the trunk, the trunk board is hung to the rafters with wearing stirrups.
Popular Post This Week