How to find studs without stud finder is not easy and simple ways, and then we need stud finder. Studs finder is a tool used to detect studs, wherein the tool uses several methods include ultrasonic sensors, ground penetrating radar, and others - others. The studs finder systems only detect the presence or absence of studs but can not distinguish what kind of studs that have been detected. At the end of the project realized the device to detect the type of studs.
Inductive sensor will work if there are any studs that are in between the sensors, there will be a change in the induction and the characteristics of the oscillator circuit will change. Changes will result in changes in the characteristics of the oscillator frequency and the voltage at the output of the second sensor. The micro-controller used is the type that has ATMega8535 RISC architecture (Reduced Instruction Set Computing) 8 bits and most of the instructions executed in one clock cycle. Studs finder is designed to recognize the type of studs include iron, copper and aluminum are still dependent on the dimensions of the studs are detected. The output of the inductive sensor is so small that it needed an amplifier. Inductive sensor output rectifier need for data to be read by the ADC and processed by a micro-controller ATMega8535 to display to the LCD.
The results of the realization of this tool have a 100 % accuracy rate. When we detected a nugget studs in an area as a part of impossible how to find studs without stud finder, the area is almost certainly contains a lot of studs, as studs nuggets rarely happen by it. The easiest way to get studs is prospecting in the area ever discovered studs. Once you decide to purchase take your time to learn about the tools you buy studs detection. For large areas that do not ever detect spot to spot (one point to another point) quickly.
Popular Post This Week