The author will share the steps of how to do loset makeovers Replace your old toilet with a new one without requiring the help builders. Prepare all equipment beside the toilet. Dry out the area around the toilet before you start dismantling and installation of the toilet. Close the flow of water into the toilet tank water through the taps are typically placed adjacent to the toilet. Pour water from the tank, the contents of the tank and dry well using a vacuum cleaner or dry cloth. Remove the water hose connected to the toilet.
In closet makeovers, Suction also the neck of closet water with a vacuum or with a sponge before. Do not let the closet is still filled with water. Remove the tank of the toilet open fastening screws and nuts, which is located at the bottom of the tank. If you have toilet mono-block type, no need to do this, because the water tank body fused with bidets. Remove the bowl cover the two screws that bind to the floors. Use the appropriate screwdriver to rotate the nut out of the screw rod.
Cut the glue sealant between the bottom of the toilet and the floor using a cutter, making it easier for you to release the toilet. After that, the body gently rocking from side to side closet to closet completely separated from the floor. Typically, once the channel appeared open to the septic tank. At the mouth of the hole, there is a wax-coated rubber ring. Remember where routed. Lift the ring, and clean the channel mouth. Disconnect also two long closet bolts from the runway. Attach the rubber ring of a new toilet as long or as directed in the manual. Tuck also two new bolts to tie toilet new toilet to the floor.
Final step of closet makeovers is new closet installation. Attach the new closet. Use level meter to measure the position of the toilet was completely flat. If it is okay, fastening bolts with nuts then cover the bowl. Pour water from the main water pipe into the toilet water tank. Staying sure the toilet works fine. If not carefully repeated measures earlier.
Popular Post This Week