Are you having a trouble in arranging the carpet runner for stairs? If so, you surely need to find some references in doing so. It is important if the stairs is made of wood. You have to make sure you pick the right elements so the carpet runner will fit the stairs and be safe for the kids going up and downstairs. The importance of having carpet runner for stairs is inevitably. The carpet can make the slippery steps more stable. So you and your family and especially for the kids, they will be protected from accidents and falls if you use the carpet runner in proper way. Using a few tools, you can bring elegance and style to your staircase by laying the carpet runner for stairs.
The choice is varied in a lot of materials. But you have to use carpet runner for your wood stairs. As for the tiles stairs, it is good if you leave it in without using any runner for the steps. Wood stairs usually can be so slippery and that is why a carpet runner is needed to cover it. This carpet will bring the home a beautiful look which matches to other decorative items. You can design your carpet runner for stairs by following some steps below here.
First, you can look at your steps and then determine where you would like it to sit. Most of it are positioned in the center of the steps. So it will be leaving the wood visible on either side. You can mark the area which the carpet runner will rest if you have decided. After that you can nail the tackles strips to the step this is for the step meets the riser so it should be about 2 inches shorter than your carpet runner.
Second, you can then cut a piece of padding for each step which should be shorter than the carpet because you don’t want it to show. It should also extend about three inches over the edge of the step using a staple gun to make it work from the pad to the step.
You can start laying the runner over the first few steps above the bottom step and then pull it down over the bottom step by pushing it against the floor at the bottom of the first step, right in the middle of the marks you have made. Then you can staple the end of it to the bottom of the step about every 3 inches. It is easy, right? You can now continue the flow and soon you will get your first carpet runner for stairs!
Popular Post This Week