Wall mounted bookshelves can be your solution for placing you book collections. It can be attached on the living room, bedroom, or your office. It is easily installed and also save more space since it does not take the floor space. You can build the bookshelves as you need, one, two, three or more. It is very flexible and need only a little effort to have a new one. Let’s see how the steps work.
First, you need no decide how big the shelves will be. Decide the length and width before you buy the materials needed. Do not forget to adjust the size with the wall where it will be applied. After you have measured it, buy some wood for the shelves, studs, glue, and screws. Now, measure how high you will attach the bookshelves. If you do not have any idea, you can use the standard measurement, about 45 to 48 inches from the floor and give mark on the wall using pencil. But, if you are installing the bookshelves for your early age children, it should be in lower height so they can reach it easily. Then, along the wall, apply the stud finder and mark the possible place of three studs. The space between them is about 15 to 16 inches.
Next, attach the shelf bracket on with the upper edge fits precisely to the pencil mark you have made. Screw it to the wall firmly and do the same for the two other brackets. After it is done, attach the 3-foot board against the bracket. Make sure that the space you give between the ends of brackets is the same. Secure it using wood screws from the bottom side, and your wall mounted bookshelves is done.
If you want to build other wall mounted bookshelves, keep in mind to give enough space between the upper and lower ones. This kind of bookshelf is a good choice for you who have a small space room because it can be attached on the wall, or even on your closet doors.
Popular Post This Week